Help Docs

OCI Network Firewall monitoring

OCI Network Firewall is a managed network security service powered by Palo Alto Networks technology. It helps protect OCI network resources by inspecting incoming and outgoing network traffic based on configured security and decryption rules.

Site24x7 integrates with OCI Network Firewall to help you monitor firewall traffic, throughput, active sessions, packet drops, security rule activity, and potential network attacks. It also discovers associated firewall policies and maintains their relationships with the corresponding firewall monitors.

Overview

Site24x7's OCI Network Firewall integration provides monitoring at both the firewall and policy levels. When you integrate OCI Network Firewall with Site24x7, the following monitors are available:

  • Network Firewall: Monitors firewall performance and security metrics, including network throughput, bytes and packets received and sent, active sessions, packet drops, security rule hits, and detected attacks.
  • Network Firewall Policy: Discovers and monitors firewall policies associated with network firewalls. Policy monitors provide visibility into firewall policy configurations and their associations.

The integration supports Network Firewall monitors. Each firewall policy is added as a separate monitor. Site24x7 dynamically maintains the relationship between firewalls and their associated policies.

Use case

Organizations use OCI Network Firewall to inspect and secure traffic flowing between their network resources and external destinations. As traffic increases, firewalls may experience higher throughput, more active sessions, and increased packet drops. Site24x7 helps you monitor these metrics and identify unusual changes that could affect network performance or indicate potential security threats.

For example, a sudden increase in packet drops may indicate that traffic is being denied by firewall rules or that the firewall is experiencing unexpected traffic conditions. Similarly, an increase in active sessions or detected attacks can help security teams investigate suspicious network activity.

Site24x7 also tracks firewall policy associations. When an administrator replaces a firewall's associated policy, Site24x7 dynamically updates the relationship, helping you maintain visibility into the policies governing your network traffic.

Benefits of OCI Network Firewall integration

Site24x7's OCI Network Firewall integration provides the following benefits:

  • Firewall performance monitoring: Track network throughput, bytes received and sent, and packet counts to understand firewall traffic patterns.
  • Session monitoring: Monitor active network sessions and identify unusual changes in connection activity.
  • Packet drop monitoring: Track dropped packets and their associated drop reasons to investigate traffic restrictions and potential network issues.
  • Security rule monitoring: Track security and decryption rule hits to understand how frequently firewall rules are matched.
  • Attack detection monitoring: Monitor metrics related to IP spoofing, MAC spoofing, land attacks, ICMP fragment attacks, ping of death attacks, and teardrop attacks.
  • Dynamic policy association: Track firewall policy associations and identify changes when a firewall is assigned a different policy.
  • Centralized monitoring: View firewall performance and associated policy information from the Site24x7 console.
  • Proactive alerting: Configure thresholds for supported metrics and receive alerts when metric values breach defined limits.

Setup and configuration

To get started with OCI Network Firewall monitoring, complete the following setup steps:

  1. Site24x7 uses cross-tenancy access to monitor OCI resources using the Site24x7 tenancy user. Create the required OCI policy to allow Site24x7 to view your resources.
  2. Log in to your Site24x7 account and navigate to Cloud > OCI > Integrate OCI Monitor.
  3. On the Integrate OCI Monitor page, select OCI Network Firewall Policy from the Services to be discovered list.

Permissions

Ensure that Site24x7 receives the following permissions to discover and monitor OCI Network Firewall resources:

API operation Required permission
ListNetworkFirewalls NETWORK_FIREWALL_INSPECT
GetNetworkFirewall NETWORK_FIREWALL_READ
ListNetworkFirewallPolicies NETWORK_FIREWALL_POLICY_INSPECT
GetNetworkFirewallPolicy NETWORK_FIREWALL_POLICY_READ

You can use the aggregate resource type network-firewall-family to grant read access to both firewall and firewall policy resources.

Learn more about the policies and permissions required for OCI monitoring.

Polling frequency

OCI Network Firewall metrics are emitted at a fixed frequency of five minutes. Site24x7 collects these metrics to provide visibility into firewall performance and security activity. Learn more about the polling interval for OCI monitoring.

Supported metrics

The supported metrics for OCI Network Firewall monitors are given below. You can also view the complete list of supported OCI metrics across all monitored services.

Network Firewall

Metric name Description Statistics Unit
Byte received count Number of bytes received through the firewall. Sum Count
Byte sent count Number of bytes sent through the firewall. Sum Count
Throughput Total network throughput handled by the firewall. Mean Bits/sec
Packets received Number of packets received at the firewall from the network, after drops. Sum Count
Packets sent Number of packets sent from the firewall to the network, after drops. Sum Count
Packet drops Number of packets dropped through the firewall. Sum Count
Packets received in error Number of packets received through the firewall that contain errors. Sum Count
Total active sessions Number of active sessions on the firewall. Maximum Count
Security rule hits Number of times a connection matches a security rule. Sum Count
Decryption rule hits Number of times a connection matches a decryption rule. Sum Count
ICMP fragment attacks Number of ICMP fragment attacks detected. Sum Count
IP spoof Number of IP spoofing attacks detected. Sum Count
Land attacks Number of land attacks detected. Sum Count
MAC spoof Number of MAC spoofing attacks detected. Sum Count
Ping of death attacks Number of ping of death attacks detected. Sum Count
Teardrop attacks Number of teardrop attacks detected. Sum Count

Threshold configuration

To configure thresholds for OCI Network Firewall monitors:

  1. Log in to your Site24x7 account and navigate to Admin > Configuration Profiles > Threshold and Availability.
  2. Click Add Threshold Profile.
  3. Select the applicable monitor type from the Monitor Type drop-down menu. Select Network Firewall.
  4. Provide an appropriate name in the Display Name field.
  5. The supported metrics are displayed in the Threshold Configuration section. Configure threshold values for the required metrics.
  6. Click Save.

Learn more about notifications and threshold profiles for OCI monitoring.

Custom metrics and status alerts

OCI Network Firewall exposes additional dimensions that help you analyze metric data at a more granular level.

  • Rule-level monitoring: Use the ruleName dimension to identify the security or decryption rules that are frequently matched.
  • Packet drop analysis: Use the dropReason dimension to identify the reasons behind packet drops.

These dimensions help administrators investigate firewall activity and understand how individual rules influence network traffic.

Capacity planning

Capacity planning is available for Network Firewall monitors and helps you understand how firewall traffic changes over time. Use the throughput, bytes received and sent, packets received and sent, and total active sessions metrics to identify sustained increases in the volume of traffic a firewall inspects. Reviewing these trends can help you identify firewalls that are approaching their provisioned capacity and plan changes before traffic inspection affects network performance.

Capacity planning can also help you compare traffic levels across monitored firewalls and identify the ones that consistently handle the highest load. Combined with the packet drop and security rule hit metrics, this gives you better visibility into how traffic is distributed across your network segments and how your firewall capacity requirements may grow based on historical monitoring data.

You can also use metric forecasting to project future throughput and session requirements for your network firewalls.

Monitor Groups

Monitor groups can also be used to view the overall status of related OCI Network Firewall monitors and streamline day-to-day monitoring.

For example, you can create separate monitor groups for production and development environments or group firewalls and their associated policies based on the applications or network segments they protect.

You can organize your OCI Network Firewall monitors into monitor groups based on your application, environment, business unit, region, or other operational requirements. Grouping related monitors provides a consolidated view of their availability and performance from a single location. You can also use tag-based monitoring to automatically organize monitors using native Oracle tags.

Licensing

  • Each OCI Network Firewall monitor utilizes one basic monitor license.
  • Each OCI Network Firewall Policy monitor utilizes one basic monitor license.

Viewing OCI Network Firewall data

To monitor your OCI Network Firewall environment, log in to the Site24x7 console and navigate to Cloud > OCI > Network Firewall. Select the required Network Firewall monitor from the discovered monitors list.

Monitor data

The monitor data for each OCI Network Firewall monitor is given below.

Network Firewall

The monitor data for the Network Firewall monitor is given below.

Summary

The Summary tab displays the firewall's availability, downtimes, and events timeline. It also provides graphical insights into network traffic, throughput, active sessions, packet drops, and security related metrics.

Configuration

The Configuration tab displays the firewall configuration details, including its region, display name, lifecycle state, compartment ID, creation and update timestamps, and associated firewall policy.

Outages

The Outages tab displays outage details, including the start time, end time, duration, and associated comments.

Notes

The Notes tab allows you to add and view notes associated with the firewall monitor.

Log Report

The Log Report tab displays a consolidated report of the monitor's logs, which can be downloaded in CSV format.

Alert Logs

The Alert Logs tab displays the chronological history of alerts triggered for the firewall monitor.

Audit Logs

The Audit Logs tab displays the audit trail of actions and changes associated with the firewall monitor.

Network Firewall Policy

The monitor data for the Network Firewall Policy monitor is given below.

Summary

The Summary tab displays the firewall policy's availability, downtimes, events timeline, attached firewalls, monitored firewalls, and updates.

Firewalls

The Firewalls tab displays the firewalls associated with the policy and their availability status.

Security Rules

The Security Rules tab displays the security rules configured in the policy, including the rule name, action, inspection type, priority, and description. Click a rule to view its detailed configuration and conditions.

Decryption Rules

The Decryption Rules tab displays the decryption rules configured in the policy. Click a rule to view its detailed configuration and conditions.

Tunnel Inspection Rules

The Tunnel Inspection Rules tab displays the tunnel inspection rules configured in the policy. Click a rule to view its detailed configuration, including general information and applicable conditions.

NAT Rules

The NAT Rules tab displays the NAT rules configured in the policy. Click a rule to view its detailed configuration and conditions.

Applications

The Applications tab displays the applications configured in the firewall policy.

Services

The Services tab displays the services configured in the policy.

URL Lists

The URL Lists tab displays the URL lists configured in the firewall policy.

Address Lists

The Address Lists tab displays the address lists configured in the policy.

TLS Decryption

The TLS Decryption tab displays the TLS decryption configurations associated with the firewall policy.

Configuration

The Configuration tab displays the firewall policy details, including its region, display name, lifecycle state, compartment ID, creation and update timestamps, and configured policy components.

Outages

The Outages tab displays outage details, including the start time, end time, duration, and associated comments.

Notes

The Notes tab allows you to add and view notes associated with the firewall policy monitor.

Log Report

The Log Report tab displays a consolidated report of the monitor's logs, which can be downloaded in CSV format.

Alert Logs

The Alert Logs tab displays the chronological history of alerts triggered for the firewall policy monitor.

Audit Logs

The Audit Logs tab displays the audit trail of actions and changes associated with the firewall policy monitor.

Related topics

Was this document helpful?

Would you like to help us improve our documents? Tell us what you think we could do better.


We're sorry to hear that you're not satisfied with the document. We'd love to learn what we could do to improve the experience.


Thanks for taking the time to share your feedback. We'll use your feedback to improve our online help resources.

Shortlink has been copied!