Configuring Flow Exports on Dell PowerConnect J-EX4200 Switches

For NetFlow analysis, you need to configure your devices to export flows to Site24x7 On-Premise Poller, which is the NetFlow collector. The On-Premise Poller will be listening to the particular port to receive flows. Learn how to find the port number of your On-Premise Poller.

Configure flows (sFlow) on Dell PowerConnect J-EX4200 switches using the following commands:

edit protocols sflow
set collector {NETFLOW_SERVER_IP}
Set collector udp-port {NETFLOW_SERVER_LISTENER_PORT}
set polling-interval 60
set sample-rate 1000

Enter global configuration mode on the router or Multilayer Switch Feature Card (MSFC), and issue the following commands for each interface on which you want to enable flow:

set interfaces {INTERFACE_NAME}